Included with DTG Printer:​
 

• Epson Driver Software

• NikkoRip Software (Windows Only)

• Power Cord

• USB Cord

• 1 CISS Bulk Ink Supply System

• 1 Set of Refillable Cartridges (Use as Cleaning Cartridges)

• 1 Set of Syringes with needles (Use To Fill Bulk Ink Supply)

• 1 Syringe with hose attached (Use for Purging Print Head)

• Electronic Base

​

Inks Recommended: FireBird Inks or Dupont Textile Inks Only (Inks Not Included)

​

Warranty: 6 Months Warranty on all parts except for the Print Head and Capping Station. We also provide 100% full Customer Support via Email Only. 

​

Production time: All orders will ship in 2 business days. 

We only accept Direct Credit Card Payments (We do not Accept PayPal). So once you're ready to place an order, email us and we will send you a Secured electronic Invoice to make payment. 

 

Things To Know:
 

• Room Temperature: This is by far the most important factor, in owning and operating any DTG Printer. Room Temperature should be below 76 Degrees Fahrenheit. If Humidity is too high, textile inks will begin to clog very quickly. 
   

• T-Shirt Material: For Best Results, we recommend 100%Cotton or 50/50 Blends. You can also print on 100% Polyester.
   

• Refillable Cartridges: These can be used instead of the CISS Bulk Ink System if you're running smaller volumes of prints.
   

• CISS: Continuous Ink Supply Systems can be used if you're running larger volume of prints.
   

• Maintenance: Cleaning Solution, Cleaning Foam Swabs and Cleaning Wipes can all be purchased from Firebird.
   

• Pretreatment: Pretreatment is required for Dark Garments and can be purchased from Firebird. Also Prints on white T-shirts are much more Vivid when Pretreatment is applied.
   

• Cleaning Cartridges: Fill a set of Refillable Cartridges with cleaning solution. These can be used when printer will not be in use. First remove ink cartridges and clean around print head nozzles using cleaning solution and a foam swap so you don't contaminate the cleaning cartridges. Then install the cleaning cartridges and run 2-3 print head cleans via Epson settings and leave them installed to avoid clogging.
   

• Pretreat Sprayer: The Wagner Sprayer is great for applying Pretreatment to garments. Please see the Nikko DTG YouTube Channel for more details. 
   

• Heat Press: A "Good" Heat Press is required for curing Textile Inks after garment is printed. We Recommend Hotronix or Geo Knight. For lower budget heat presses, purchase from Amazon this way you can see Customer Reviews.
   

• Heat Press Sheets: We recommend using a Teflon Sheet or Parchment Paper.
   

  • Teflon Sheet (Gives print a Gloss Finish) (Can also use to press pretreated T-Shirt)
     

  • Parchment Paper (Gives print a SemiGloss Finish) (Can also use to press pretreated T-Shirt)
     

  • Kraft Paper (Gives print a Matte Finish) (Do not use to press Light Pretreated T-Shirts. Will eventually leave yellow box on T-shirt)